At 09:19 PM 4/22/97 -0400, you wrote:
>I see no need for switching B+ or B-... as Rich, AG6K stated
>when an amp is in cutoff it doesn't matter if HV is present or not, and
>doesn't matter if filaments are on or off.
>Good Luck,
>Terry - W6TG
>
You and KL7RA are very fortunate! Most of us don't have a 4 kv@ 6 amp
power supply lying around the shack, nor do we have electrical drops
big enough to handle that. It still amazes me that if 6 amps are all going
at one time, and all the B-'s are tied together, and the plate IP meters
are in the B- returns, and the grid meters are from B- to chassis; that
VERY "screwy" meter readings don't take place!
(((73)))
Phil, K5PC
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|