Amps
[Top] [All Lists]

[AMPS] 4-1000A

To: <amps@contesting.com>
Subject: [AMPS] 4-1000A
From: measures@vc.net (Rich Measures)
Date: Fri, 16 May 97 22:19:33 -0700
>Unfortunately, there is no easy way to do a passive test on that tube
>Tim.
Verily.  About he only thing you can test for without plugging one into 
an amplifier is gas.  At 12kV from anode to screen, you should see no 
glow in a dark room. 
...snip...
>Many modern (1990 and later for example)  4-1000 Broadcast  pulls are
>really beat ...snip...
Amen.  Why not use an 8171 in Class AB1 instead instead of an 
8166/4-1000A in g-g?  Either tube needs about the same amount of chassis 
space and drive power.  The tank circuits aren't that different.  Handles 
are handy.  The blower for an 8171 in ham service is much quieter than is 
the blower for an 8166 with air system socket and chimney.  Svetlana has 
good prices on tubes with handles.  
Rich---


R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread] Current Thread [Next in Thread>