Amps
[Top] [All Lists]

[AMPS] Heath HL-2200

To: <amps@contesting.com>
Subject: [AMPS] Heath HL-2200
From: measures@vc.net (Rich Measures)
Date: Tue, 10 Jun 97 15:15:58 -0700
>Heath HL-2200...  I am in search of a comprehensive source for
>
>modifications on the HL-2200.  Specifically I am interested in
>
>a mod for limiting in-rush current..  any help is appreciated.
>
If you measure the 3-500Z filament inrush current with an oscilloscope, 
you may find that the inrush current is well within Eimac's rating of 29 
maximum inrush amperes.  However, if you start the HL-2200 on the SSB 
tap, the on/off may not last very long.  A fix is to install a step-start 
circuit.  There's one in *Amplifiers* at:
http://www.vcnet.com/measures
The stock RF relay in the 2200 is too slow to keep up with modern radios, 
however, it makes a good step-start relay.  For faster RF switching, see 
Figure 7, or the 1/94 QST article "The Nearly Perfect Amplifier".  
Rich---

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>