Amps
[Top] [All Lists]

[AMPS] Recycling filament

To: <amps@contesting.com>
Subject: [AMPS] Recycling filament
From: measures@vc.net (Rich Measures)
Date: Thu, 26 Jun 97 19:42:03 -0700
>Someone said:
>>
>>>Cathode temperature would drop at the nearly the same rate as it 
>>>takes to rise. If the line totally removed voltage for ten seconds, 
>>>it would only require a ten second warm up to be back at full 
>>>temperature.
><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
>I don't believe this is correct.  Warm-up or down time is like an RC
>time constant curve.  When charging a capacitor, the last few percent
>takes much longer than the first few percent.  The reverse holds true
>for discharging.  When power is removed, the initial drop rate is much
>faster than the later drop rate.  Kind of like your bank account - it
>goes out a lot faster than it comes in.
>
So it would seem, Bill.
- Rich -


R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>