Amps
[Top] [All Lists]

[AMPS] SB-220 C4 failure

To: <amps@contesting.com>
Subject: [AMPS] SB-220 C4 failure
From: km1h@juno.com (km1h @ juno.com)
Date: Tue, 08 Jul 1997 08:41:49 EDT
On Mon, 7 Jul 97 22:30:17 -0700 Rich Measures <measures@vc.net> writes:
>>> From:          Rich Measures <measures@vc.net>
>>>
>>> For adding a step-start relay and high speed switching, a FWB is 
>>> indicated.  Half-wave rectification causes DC to unhappily flow in 
>the 
>>> transformer.  Adding 3 more diodes  and ungrounding the 80v winding 
>is 
>>> easy/inexpensive.  
>>
>>The very small  power demand of the bias supply (about 12 watts)  
>>would not greatly affect the core losses of a transformer already 
>>delivering 160 watts to a resistive load.
>>The half wave rectifier is perfectly fine.
>
>-  20uF in half-wave service is perfectly fine for filtering the 
>original 
>20mA load, however, it is a bit lacking for filtering the 100mA that 
>the 
>high speed switching and step-start circuits consume.  Increasing C is 
>
>one fix.  Doubling the ripple frequency, by converting to FWB 
>rectification is another fix.  3 rectifiers cost less than another 
>filter 
>C.  

True, but the original discussion was about the capacitor failing and
requiring replacement anyway. The cost of a 100-200MF 160V capacitor, if
someone wants to add a bunch of extra parts will not require a 2nd
mortgage. The 90V winding on the xfmr is rated 100ma CCS.


>
>>If I was going to do a mod, I'd get rid of the whole 130 volt supply, 
>
>>and let the tube self-bias off. Than a more conventional 12 volt 
>>relay could be used.
>>
>Self cut-off biasing is good.  However, conventional relays are too 
>slow 
>to keep pace with modern radios. 

QSK operators are a small minority; the original relay is fine for the
rest of us.

73...Carl   KM1H

>Rich---
>
>R. L. Measures, 805-386-3734, AG6K   
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>