Amps
[Top] [All Lists]

[AMPS] Temp of exhaust

To: <amps@contesting.com>
Subject: [AMPS] Temp of exhaust
From: w8jitom@postoffice.worldnet.att.net (w8jitom@postoffice.worldnet.att.net)
Date: Wed, 23 Jul 1997 06:18:21 +0000
> I am using a 3CX1200A7 and I wonder if anyone knows the safe operating
> temps of this tube at idle and under load.  I have a Fluke temp meter
> that is accurate and shows 120f at idle and 230f at 1.5-2k output into
> a load.  Any comments
> 
> Randy

The exhaust temperature has nothing to do with the tube temperature 
Randy.

The seals are rated at 250 degrees C maximum.

That could occur with 0 degree air temp on the exhaust of a PA, 
or 500 degrees C. You are too far downstream to estimate the seal 
temps.

What you need to measure are the seals, and I would use a 
temperature indicating crayon or paint to do so. The Fuke would 
 be a shock hazard.

73, Tom W8JI 

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>