>Hi Rich,
>Correct, it's the '7'.
>
>Phil G4ZOW/M
>
Roughly 400w drives a 3CX3000A7 in g-g linear amplifier service. Since
the Mu is 200, 0v bias is possible. Some builders have reported
instability problems in the 60MHz to 70MHz area. It might be a good idea
to build a low VHF-Rp vhf suppressor.
Rich---
>
>In message <19970722032009.AAB7862@[205.231.11.81]>, Rich Measures
><measures@vc.net> writes
>>>Have recently picked up a 27.125 Henry made industrial heating amp with
>>>some nice components including an Eimac 3CX3000A ...snip...
>>
>>This is not a complete designator, Phil. There should be a number after
>>the 'A'.
>>Rich---
R. L. Measures, 805-386-3734, AG6K
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|