Amps
[Top] [All Lists]

[AMPS] Solid State Relay for Anode Primary ?

To: <amps@contesting.com>
Subject: [AMPS] Solid State Relay for Anode Primary ?
From: measures@vc.net (Rich Measures)
Date: Thu, 20 Nov 97 00:43:21 -0800
>Hi,
>
>Seeing that the screen supply question got some people going here
>is another. 
>
>Is there any reason I shouldn't use a solid state relay to switch
>an anode transformer primary (2.5Kw level) ? I've noticed that
>25 Amp versions are available that switch on at zero crossing.
>Sounds like a nice way to eliminate the mechanical relay with current
>limit resistor for surge protection.

The current limit resistor goes between the filter C and the HV-RFC.  
>Thanks
>
>--db-- (AA2GF)
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm


R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>