Amps
[Top] [All Lists]

[AMPS] TL922 and burned grid choke

To: <amps@contesting.com>
Subject: [AMPS] TL922 and burned grid choke
From: measures@vc.net (Rich Measures)
Date: Wed, 3 Dec 97 10:34:43 -0800
>Good morning, 
>Here are details of repairs I found necessary when one 3-500Z
>had a grid-filament short in my TL922:
...snip...
>What is the best component to protect the filament/bias transformer
>is the event of an unexpected grid/filament short in the TL922?

Convert the 922 from V-cutoff bias to R-cutoff bias.  To do this:
1.  Remove the +120v power supply connection to the bias relay contacts.  
2.  Connect the existing 100k ohm, 0.5w resistor, across the NO contacts. 
  

Rich...

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>