Amps
[Top] [All Lists]

[AMPS] EM marked caps

To: <amps@contesting.com>
Subject: [AMPS] EM marked caps
From: km1h@juno.com (km1h @ juno.com)
Date: Sun, 07 Dec 1997 16:23:26 EST
On Sun, 07 Dec 97 15:23:58 PST "james fisher" <k4gf@worldnet.att.net>
writes:
>I have come into a bunch of 200 pf capacitors which look like the ones 
>pictured as dipped micas in the mouser catalog.  However, they are 
>marked with the value followed by the letters EM...does that mean 
>"encapsulated mica" or what is that EM all about?  some are also 
>marked with voltages..500 or 1000.  Then there are some more, larger, 
>still marked EM.  Are these mica?  Do they carry significant amounts 
>of current?  Please, pretty please and thanks.  K4GF, 
>k4gf@worldnet.att.net


They are all dipped mica (encapsulated) types. As far as current ratings
it depends on the case size (usually a CM or DMxx number), C values, and 
frequency.
A typical 500V will be fine up to 200W or so in an amp input network. 
The larger case size will be in the 500W range and paralleling 3 or more
up will usually handle fixed C on the load side for 80/160M at 1500W +. 


73   Carl  KM1H

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>