Amps
[Top] [All Lists]

[AMPS] High Potential Tester (high-pot) Components

To: <amps@contesting.com>
Subject: [AMPS] High Potential Tester (high-pot) Components
From: G3SEK@ifwtech.demon.co.uk (Ian White, G3SEK)
Date: Sun, 18 Jan 1998 19:58:29 +0000
Rich Measures wrote:
>
>If you enjoy repairing or building amplifiers, a high-pot. is highly 
>useful.    It can be used for:  
> testing vacuum components such as tubes (seals, loose gold, fil./grid 
>probs.), relays and capacitors;  measuring  rectifier PIV; checking 
>insulation, corona test, and for guidance in resettling loose gold 
>melt-balls in 8877s, 3CX800A7s and the like.
>-  An article on building a high-pot. is available at:
>www.vcnet.com/measures

Rich is right - it's a very useful tool. I was lucky enough to find a
DC-powered inverter that goes up to 9kV, and powered it from a variable
DC source. It works FB and can show a lot of new information.

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.demon.co.uk/g3sek

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>