Amps
[Top] [All Lists]

[AMPS] Tuned Input

To: <amps@contesting.com>
Subject: [AMPS] Tuned Input
From: measures@vc.net (Rich Measures)
Date: Sun, 18 Jan 98 15:49:16 -0800
>Am in the process of building an 811A amp. 4 tube variety. I'm
>up to the tuned input and have some questions. I see in Orr's
>handbook a tuned input circuit using a tunable slug coil and a
>cap for each band. This differs from the usual pi type input
>cicuit. Question: is this a good
-   Eimac recommends using a Pi network tuned input.  The Q needs to be 
roughly 2 (Xc1=25 ohms).  .   If you have the room, 6 tubes would be a 
bit more in line with the drive that current radios deliver.  The 811A is 
only good for 65w dissipation. 
Rich...

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>