Amps
[Top] [All Lists]

[AMPS] Re: Oscillators with supressors?

To: <amps@contesting.com>
Subject: [AMPS] Re: Oscillators with supressors?
From: km1h@juno.com (km1h @ juno.com)
Date: Mon, 20 Apr 1998 12:29:11 EDT
On Fri, 17 Apr 1998 16:30:53 -0600 John Lyles <jtml@lanl.gov> writes:
>Carl sez:
>
>>I have never operated a QRO RF oscillator but have picked up many for
>>parts or conversion. These go from single 4-400A's up to 14KW water
>>cooled triodes. Not one has ever had a parasitic suppressor. Is there 
>a
>>reason for this? Many/most were built by well known and competent
>>commercial companies..
>
>Aha! That is an Oxymoron, competent commercial companies (CCC)! Yes, 
>there
>are some, but then again, there are probably as many who aren't. RF
>dielectric heating equipment and induction heaters (eddy current 
>heating)
>can be extremely simple. Tuned plate tuned grid, get the phase right, 
>and
>whamo, it's an oscillator. The worse the tube is for linear 
>communications
>service, the better (at least it seems). Like that Philips/Amperex 
>5868
>that was mentioned here a few months back (same as the Seimens  
>RS1016), a
>horrible old bottle for an amplifier, but great for a rugged 
>industrial
>noise maker.
>
>The lack of parasitic suppressor in these beasts maybe due to the fact 
>that
>the designers figured that the thing would only take off on one freq, 
>the
>desired one. There is so much feedback in them, that they are bound to
>always start, and always lock on the main frequency. But then again, 
>if you
>get an arc in the circuit (not from a parasitic - but from a small fly 
>or
>gnat or a piece of dirt), you just grounded the circuit in a new 
>place, and
>the thing jumps frequency to oscillate in a new mode.
>
>This is all academic here, as the forum is about amateur amplifiers 
>for the
>most part. I was just wondering about experiences with oscillators 
>that
>also make parasites. Yes, sounds like it happens, in more than one
>oscillator. But those guys (the industrial RF'ers) don't really care 
>if the
>unit goes burp, slapzzz, groan, pop, as long as it starts back up 
>after the
>spark trips a relay and clears. Wonder how they get by?
>
>John

Academic, not really John. Many hams use those oscillators as the basis
for an amplifier  ( not with the 5868, but the socket is the same as the
3-1000Z and 4-1000A). There are many 3-3000A7 units showing up for real
cheap $$ and I was just wondering why I never noticed suppressors. Tnx
for the plausible answer.

73  Carl  KM1H

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>