Amps
[Top] [All Lists]

[AMPS] Re:

To: <amps@contesting.com>
Subject: [AMPS] Re:
From: measures@vc.net (Rich Measures)
Date: Tue, 12 May 98 09:27:17 -0800
>Rich,
>
>In the few months I have observed this reflector, you have used the word 
>"rauch", usually lower-case but sometimes upper-case.  I've assumed it's 
>an abortive attempt to slander an author, but in my attempts to locate 
>this author as a reference have failed.  

Slander is the communication of false information.   . 

 .  Info on Mr. Rauch is available in the grate parasitics debate archive 
on Will, KN6DV''s Web site. If it is gone, I can send you a text file of 
the debate via e-mail, however, it is large.  

 >For those of us new to the 
>reflector, would you kindly provide a reference for "rauch" 

See pages 71-4  of the Sept. 1994 *QST*.  Mr. Rauch manages to include 
himself (Ameritron) on his list of recognized amplifier "experts". 

>or "rauch-schnauzer"?  

A rauchschnauzer is a mythical breed of lap-dog.  
.     During Phase-I of the grate parasitics debate (which began on the 
rec.radio.amateur.homebrew Newsgroup) , when Mr. Rauch refuted standard 
AC Circuit Analysis, his supporters did not question him.   When he 
professed that gold has a second, lower melting point below 1063 deg. C, 
ditto.   When Mr. Rauch retroactively promoted an ex-Eimac employee from 
Engineer-B to "R+D Engineering Manager", ditto.   .  

>If not, please simply state the theory, instead of 
>its author.  

His theory is that one can build a vhf suppressor out of copper-wire that 
equals the performance of a similar vhf suppressor that is built from 
resistance-wire.  This can indeed be done by increasing the L of the 
suppressor-inductor (Ls in Wes' measurements), and by increasing the R of 
the suppressor-resistor (Rs).  However, the trade-off is exponentially 
increased 28MHz dissipation in the suppressor-resistor.  .  The short 
answer is that the use of resistance-wire in Ls allows the designer to 
reduce the 28MHz dissipative burden in Rs while improving the vhf 
performance of the suppressor.   . 

>This way, we can stay with the physicis of the thing, and 
>move away from the emotional one-upsmanship that appears here so often.
>
Information that does not wash will backfire on its originator.  

-  later, Arlen

cheers
Rich...

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>