Amps
[Top] [All Lists]

[AMPS] Alpha 78 problem

To: <amps@contesting.com>
Subject: [AMPS] Alpha 78 problem
From: measures@vc.net (Rich Measures)
Date: Fri, 9 Oct 98 07:18:06 -0800
>
>Hi, 
>
>D44BC got a problem with his Alpha 78 amplifier, maybe some of yourguys
>can help us to guess what could cause this problem:
>
>When switching the amp ok evrything is ok. As soon as you apply drive,
>and anode current is flowing, the amp will switch off. You can switch it
>on again, some result than.
>
I would check each tube [cold] with a high-potential tester.  If the 
anode/grid leakage is over roughly 10uA @ 5000v, it is not good news.  If 
the leakage current decreases substantially with neg. polarity, the 
presence of gold melt-balls is indicated.  
-  later, Carsten

Rich. Measures.  Web site:  www.vcnet.com/measures


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>