Amps
[Top] [All Lists]

[AMPS] Looking for parts..

To: <amps@contesting.com>
Subject: [AMPS] Looking for parts..
From: measures@vc.net (Rich Measures)
Date: Sat, 17 Oct 1998 05:31:53 -0800
>
>For the project I am working on I need a 4 inch length of teflon rod. Would
>anyone know of a source for same? Or, can I get away with using something
>else. 

Compared to Teflon, G-10 epoxy-fiberglass tubing, is stronger, easier to 
work with, and it won't cold-flow under pressure.  In a choke fire, 
Teflon makes unpleasant phosgene gas.  A souce of G-10 and G-11 tubing is 
listed in building chokes section of *Amplifiers*, (on myWeb site).  It 
is not a bad idea to check the choke with a dipmeter, after it is wired 
in, before "firing up" the amplifier.  //  More L is not always better.  
-  later, John

Rich. Measures.  Web site:  www.vcnet.com/measures


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>