Amps
[Top] [All Lists]

[AMPS] Alpha 76PA repairs

To: <amps@contesting.com>
Subject: [AMPS] Alpha 76PA repairs
From: KA2YKC@aol.com (KA2YKC@aol.com)
Date: Sat, 17 Oct 1998 23:06:58 EDT
This is a multi-part message in MIME format.

--part0_908680018_boundary
Content-ID: <0_908680018@inet_out.mail.aol.com.1>
Content-type: text/plain; charset=US-ASCII

 

--part0_908680018_boundary
Content-ID: <0_908680018@inet_out.mail.aol.com.2>
Content-type: message/rfc822
Content-transfer-encoding: 7bit
Content-disposition: inline

From: KA2YKC@aol.com
Return-path: <KA2YKC@aol.com>
To: amps@contesting.com
Subject: Alpha 76PA repairs
To: <amps@contesting.com>
Date: Sat, 17 Oct 1998 22:16:11 EDT
Mime-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit

Hello All,



 I'm in the process of repairing an Alpha 76CA for a friend. For some reason
he fried the plate choke (maybe out of band operation). Replaced the plate
choke, all else visually looked good and tested good. Upon firing it up I
noticed that I had no output although there was plate current. After close
visual inspection, I discovered the braided staps used to connect the band
switch to the LOAD cap was very brittle and had broken away from the variable
cap. ( Is it possible a No-Load condition could have fried the plate choke ?)

 Since it is too short to simply re-attach to the screw stud of the cap, I was
wondering what the best type of conductor would be to replace the strap and
re-connect the circuit. I was planning on using a piece of 12ga. solid copper
conductor from a piece of Romex. Anyone have a better idea?

Thanks & 73
Eric

--part0_908680018_boundary--

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>