Amps
[Top] [All Lists]

[AMPS] Thordson C H T Series

To: <amps@contesting.com>
Subject: [AMPS] Thordson C H T Series
From: km1h@juno.com (km1h@juno.com)
Date: Fri, 4 Dec 1998 12:42:40 -0500


On Thu, 3 Dec 1998 23:04:25 -1000 "Jim AH6OY" <ah6oy@lava.net> writes:
>    The transformer was probably cut out of a BC610. I have the option 
>of hooking up 115 or 230 with the input being configureable. The 
>previuos owner had the output marked as 6K AC for the output. 
>I'm wondering what is the third wire of the output end ?
>Any suggestions on how many ohms to represent as a load before 
>plugging it in ? 
>I'd like to prevent ruining this survivor by preventing it from 
>shorting out. 
>I wish the 3rd wire would be 7.5 VDC using the case as ground. I don't 
>think I've been that good to deserve luck like that. I'm primarily 
>wondering what the third wire of the output is.

The BC-610 used tube rectifiers in a FW ckt. The "third wire" is the
center tap. The 6KV is the voltage across the complete secondary. It
could handle a 250TH RF stage and a pair of 100TH(L) ?  modulators but I
would be leery about using it in a modern SS FWB config.
I built an AM KW with a pair of 250TH's and dual xfmrs salvaged from
BC-610's back in 1957 when I was in the MARS pgm.

 73  Carl  KM1H



            73  Jim  AH6OY

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>