Amps
[Top] [All Lists]

[Fwd: [AMPS] DENTRON MLA 2500 JUMPER SETIINGS FOR 117V]

To: <amps@contesting.com>
Subject: [Fwd: [AMPS] DENTRON MLA 2500 JUMPER SETIINGS FOR 117V]
From: ohashi@ny.airnet.ne.jp (ohashi)
Date: Sun, 13 Dec 1998 23:24:55 +0900
This is a multi-part message in MIME format.
--------------713958128701EAA23093C706
Content-Type: text/plain; charset=iso-2022-jp
Content-Transfer-Encoding: 7bit

Hello AMP folks from Japan!!

>Hello all, I need some help finding the jumper settings for 117V on the
>DENTRON MLA 2500 amp...According to the manual the jumpers should be on the
>back of the amp without having to remove the cabinet...but on this
>particular amp I couldn't seem to find the jumpers..Any help would be
>appreciated as I want to try the

I have an MLA-2500B AMP.  I don't know the difference
between MLA 2500 and MLA-2500B.  My AMP has a block
terminal to change input voltage on the back panel
just above the FUSE holder.  The block terminal is
covered by metal case and fastened by two screws
on the left.

'73 de JA2DHC/1  Kazuo Ohashi
  QTH: Fujisawa, Kanagawa, Japan
   PBBS: JA2DHC@JL1ZND.11.JNET1.JPN.AS
    Home Page: http://www.ny.airnet.ne.jp/ohashi/
--------------713958128701EAA23093C706
Content-Type: message/rfc822
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Received: from contesting.com (dayton.akorn.net [205.217.100.11])
        by mail.ny.airnet.ne.jp (8.8.8/3.6W/06/13/98-NY.AIRNET.NE.JP) with 
ESMTP id GAA57548
        for <ohashi@ny.airnet.ne.jp>; Sun, 13 Dec 1998 06:14:01 +0900
Received: from dayton.akorn.net (dayton.akorn.net [205.217.100.11])
        by contesting.com (8.9.1a/8.9.1) with SMTP id QAA00345;
        Sat, 12 Dec 1998 16:04:07 -0500 (EST)
Received: by dayton.akorn.net (TLB v0.10a (1.23 tibbs 1997/01/09 00:29:32)); 
Sat, 12 Dec 1998 16:03:39 -0500 (EST)
Message-Id: <199812122103.PAA25879@dfw-ix13.ix.netcom.com>
X-Sender: tofull@popd.ix.netcom.com
X-Mailer: QUALCOMM Windows Eudora Pro Version 4.0
To: <amps@contesting.com>
Date: Sat, 12 Dec 1998 16:03:14 -0500
To: amps@contesting.com
From: TJ Fuller <tofull@ix.netcom.com>
Subject: [AMPS] DENTRON MLA 2500 JUMPER SETIINGS FOR 117V
In-Reply-To: <199812122049.PAA29978@contesting.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: owner-amps@contesting.com
Precedence: bulk
X-Sponsor: W4AN, KM3T, N5KO & AD1C


Hello all, I need some help finding the jumper settings for 117V on the
DENTRON MLA 2500 amp...According to the manual the jumpers should be on the
back of the amp without having to remove the cabinet...but on this
particular amp I couldn't seem to find the jumpers..Any help would be
appreciated as I want to try the
amp first on 117V...Thanks, Tom KE4QCM


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm



--------------713958128701EAA23093C706--


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>