Amps
[Top] [All Lists]

[AMPS] In-rush Protection

To: <amps@contesting.com>
Subject: [AMPS] In-rush Protection
From: royanjoy@ncn.net (Roy Koeppe)
Date: Wed, 20 Jan 1999 13:59:59 -0600
This is a multi-part message in MIME format.

------=_NextPart_000_0018_01BE447D.2B04FAE0
Content-Type: text/plain;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable


-----


The in-rush protection scheme I use is the simplest, cheapest, easiest =
and (best?) of all. It requires NO modification whatever to the amp. And =
it also provides in-rush protection to the HV diodes and cap bank as a =
free bonus. It starts everything gently at half voltage, and can be used =
at shut down time to cool hot tubes. The only requirement is that your =
amp must use zero-bias, triode tubes such as 3-500Z, 572B, etc.
=20
OK, you need ONE component: a DPDT hefty toggle switch or equivalent. =
Run the moving, common contacts to a female power plug cord receptacle. =
Your amp plugs into this "adapter cord." Another cord runs from one =
fixed set of contacts to your 120 VAC wall outlet. One last cord runs =
from the other fixed contacts to your 240 VAC outlet.=20
=20
Get the picture? You always turn on the power switch on your amp while =
the toggle is set in the 120 position. Then, after the tube(s) warm up =
to half brightness, (and your B+ reads half normal) you simply switch =
the toggle up to the 240 position. Power down is accomplished in reverse =
order--you can cool down a few minutes, if you like before shutting off =
the main switch on your amp.  Simplicity is ingenuity, a wise man once =
told me. There's very little interest here for Mr. Murphy.
=20
73,    Roy      K6XK/0   Iowa Outback
=20
=20

------=_NextPart_000_0018_01BE447D.2B04FAE0
Content-Type: text/html;
        charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN">
<HTML>
<HEAD>

<META content=3Dtext/html;charset=3Diso-8859-1 =
http-equiv=3DContent-Type><!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 =
HTML//EN">
<META content=3D'"MSHTML 4.72.3612.1700"' name=3DGENERATOR>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV>&nbsp;</DIV>
<DIV><FONT face=3DArial size=3D2><B>-----</B><BR><BR></DIV></FONT>
<DIV><FONT color=3D#000000 size=3D2>The in-rush protection scheme I use =
is the=20
simplest, cheapest, easiest and (best?) of all. It requires NO =
modification=20
whatever to the amp. And it also provides in-rush protection to the HV =
diodes=20
and cap bank as a free bonus. It starts everything gently at half =
voltage, and=20
can be used at shut down time to cool hot tubes. The only requirement is =
that=20
your amp must use zero-bias, triode tubes such as 3-500Z, 572B,=20
etc.</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2>OK, you need ONE component: a DPDT hefty toggle =
switch or=20
equivalent. Run the moving, common contacts to a female power plug cord=20
receptacle. Your amp plugs into this &quot;adapter cord.&quot; Another =
cord runs=20
from one fixed set of contacts to your 120 VAC wall outlet. One last =
cord runs=20
from the other fixed contacts to your 240 VAC outlet. </FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2>Get the picture? You always turn on the power switch =
on your=20
amp while the toggle is set in the 120 position. Then, after the tube(s) =
warm up=20
to half brightness, (and your B+ reads half normal) you simply switch =
the toggle=20
up to the 240 position. Power down is accomplished in reverse order--you =
can=20
cool down a few minutes, if you like before shutting off the main switch =
on your=20
amp.&nbsp; Simplicity is ingenuity, a wise man once told me. There's =
very little=20
interest here for Mr. Murphy.</FONT></DIV>
<DIV><FONT size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT size=3D2>73,&nbsp;&nbsp;&nbsp; =
Roy&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;=20
K6XK/0&nbsp;&nbsp; Iowa Outback</FONT></DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV>
<DIV><FONT color=3D#000000 size=3D2></FONT>&nbsp;</DIV></BODY></HTML>

------=_NextPart_000_0018_01BE447D.2B04FAE0--


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] In-rush Protection, Roy Koeppe <=