[Top] [All Lists]

[AMPS] resistors

To: <>
Subject: [AMPS] resistors
From: (
Date: Sat, 20 Feb 1999 15:17:16 -0500

On Sat, 20 Feb 1999 10:11:49 -0800 "Ron Spencer" <> writes:
>Hello I need some help here. I working on the power supply for the 
>tube. The question I have is how to mount the bleeder resistors
>I have two ohmnite about 7 inches long, they are 100 watt 100k which 
>will be
>in series. Can I use a thur bolt ? or would this be two risky ?

If you use the original style self centering end clamps and thru bolt you
will have plenty of reserve voltage rating at 4KV so half that is very
safe.   Mount to a bakelite board or a ceramic stand-off. DO NOT mount
directly to the chassis as I have found that the end mounting terminal
tolerance varies quite a bit from the actual end of the resistor.

73  Carl  KM1H

>FAQ on WWW:     
>Administrative requests:

You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at
or call Juno at (800) 654-JUNO [654-5866]

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>