Amps
[Top] [All Lists]

[AMPS] HV Power Supply for 3-500Z

To: <amps@contesting.com>
Subject: [AMPS] HV Power Supply for 3-500Z
From: W8IK@ibm.net (Joe Subich, W8IK/4)
Date: Wed, 24 Feb 1999 22:28:18 -0500

> >
> >What taps can I use??
> >Have a like new!!! but old United Transformer Company Type S47 hv
> >transformer  115 vas primary secondary taps at 2000, 2500, and 3000 vac
> >center tap. 32 mf 4500 vdc cap and GE commercial full wave bridge. The
> >transformer weighs in at 25 lbs. No current rating but according to the
> >Twenty-Third Edition of the Radio Handbook should have an IVS of about
> >1.5 KW. Actual AC checked at the line here in house is 128 vac.
>
> ?  I own a S-47 transformer.  It is not recommended for  Fullwave Bridge
> service because the CT is designed to be operated at ground potential.
> The only game in town is Fullwave CT.
>

Since Rich didn't answer your question ...

With a full-wave CT rectifier and capacitor input filter, the 2500 volt
taps will provide 3250 volts no-load.  The Eimac catalog lists normal
operation of the 3-500Z at 3000 volts.

73,
   ... Joe Subich, W8IK/4  ex-AD8I
       <W8IK@IBM.NET>



--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>