Amps
[Top] [All Lists]

[AMPS] B&W PT2500

To: <amps@contesting.com>
Subject: [AMPS] B&W PT2500
From: w1rq@arrl.net (brad roope)
Date: Fri, 2 Apr 1999 19:13:56 -0500
Hello:

A friend of mine has one of the first manufactured PT2500 Amplifiers
manufactured by B&W. He would like to know if there were any major changes
made in the power supply. He is not sure of what the Load /No Load Plate
voltage should be. The manual said 3800 Volts, but this was lined out and
it said 3450V Exactly what his meter reads. The actual voltage measured
with a high voltage and a Fluke meter lower.  

I would like to know what the typical power output  and plate voltage
should be for these amplifiers, and if anyone knows if the earlier designs
produced less power output.

brad





--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>