Amps
[Top] [All Lists]

[AMPS] B&W 850 Question

To: <amps@contesting.com>
Subject: [AMPS] B&W 850 Question
From: kb7ww@chatusa.com (Arthur Moe)
Date: Sat, 03 Apr 1999 15:01:07 -0800

Yes, You need to acquire a switch contact and a "hood" plus some coil
stock to make the inductor for 160m. There are extra holes on the 
back of the switch to add the contact. Add the "L" in series and use 
the switch contact at the junction of the 80m and 160m coils. The new
coil will not fit in the original frame and will have to be mounted 
outboard of the 850 it's self.


Art
KB7WW

George McCrary wrote:
> 
> Hello Folks,
> 

> 
>         Is it possible to modify a standard 850 for use on 160 thru
> 10M? If not would someone like to swap the B&W for a tank assembly
> that works 160 through 10M?
> 
>                                         Regards,
> 
>                                         George (KQ4QM)
> 
> --
>

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>