>
>I would be inclined to use a simple splitter at the input to both amps and
>take a small (3dB) hit on the TL922 output and an even smaller hit on the
>91B output (1dB). In practice you may find that the decreases are not even
that
>much.
>
>Another option might be to build a 200Watt amp to boost the imput power up
>Many modern rigs will actually give rather more than 100 watts if you adjust
>the ALC - 150 watts is not uncommon I'm told. If you take care of the
>cooling of the rig this might be an good option...
? If the ALC adj. is turned up with 12v-16v rated radios, a better Z
match can be obtained by increasing the supply potential to 16v. The
transistors in many 12v radios are rated for 18v operation, so there is
still a margin of safety.
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|