Hello,
The thought came to mind that the amp may use a padder cap switched in
parallel with the plate tuning cap or loading cap for 80M. If so, that cap
may be defective, or not being switched in properly.
>>>>>The PA tuning
was always different than other 30L-1's making it very difficult to load on
80m.(I trimmed a special chunk of line to get it to work)<<<<<
Good luck, K6XK
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|