[AMPS] Henry 2K2

[G3SEK@ifwtech.demon.co.uk (Ian White, G3SEK)]

Rich Measures wrote:
>>The cathode doesn't go strongly negative at all - it stays around
>>chassis potential, much as it would if the glitch resistor is in the
>>positive lead.
>
>?  provided that the glitch-R is placed on the neg. side of the
>anode-current mete shunt-R.  .
>
Agreed - that's the only location where it is equivalent to placing it
in the B+ lead.


>? Is there a tube manufacturer who does not recommend placing the
>glitch-R in the positive side of the anode supply?
>
Probably not. More to the point, is there a tube manufacturer who does
not recommend placing the glitch-R in the negative side either?

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.demon.co.uk/g3sek

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm