Amps
[Top] [All Lists]

[AMPS] S units

To: <amps@contesting.com>
Subject: [AMPS] S units
From: W8JI@contesting.com (Tom Rauch)
Date: Wed, 14 Jul 1999 11:03:10 -0400
> >   If it was worth the effort, one of the new Analog
> Devices (AD8307; it
> >memory serves) wide range log IC's could be made into a
> truly accurate
> >S-meter circuit.
> 
> 
> Only if it's hooked in outside the AGC loop.

In my receiver that is in front of the major selectivity, and even the 
mixer.

But I believe the AD8307 could be used if "wrapped-around" the 
entire IF stages and used to supply AGC. While a large change 
like that would not lend itself to easy installation, it could be used 
in a new design with suitable loop filters to provide correct AGC 
time constants.

Seems like a lot of work compared to remarking the scale on the 
existing S meter, or simply using a reasonably good but cheap 
step attenuator.


73, Tom W8JI
w8ji@contesting.com

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>