Amps
[Top] [All Lists]

[AMPS] Maxwell HV caps

To: <amps@contesting.com>
Subject: [AMPS] Maxwell HV caps
From: wb8jkr@juno.com (Mark S Graalman)
Date: Wed, 25 Aug 1999 15:56:24 EDT
  I used two of those caps in a 3500 VDC supply for
12 years with no problems, if they are the same caps
they were used in defib machines. The caps I have are
rated at 35 Ufd at 6 KV and are about 4" square by about
8" tall.

Mark  WB8JKR


On Wed, 25 Aug 1999 16:08:12 +0100 "Conrad Farlow"
<conrad.farlow@virgin.net> writes:
>
>Hello I have a maxwell capacitors 30mfd 6kV capacitor. I was intending 
>to
>put it in a 3.8Kv (off load) HT supply for a 8877.A friend of mine 
>said that
>he had seen something detrimental about these caps for HT smoothing 
>purposes
>on this reflector. The cap is physically a lot smaller than I would 
>have
>expected.It is a metal cased capacitor and the case has bright orange 
>paint
>on it.Any info?
>
>73 de Conrad G0RUZ
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampsfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>

___________________________________________________________________
Get the Internet just the way you want it.
Free software, free e-mail, and free Internet access for a month!
Try Juno Web: http://dl.www.juno.com/dynoget/tagj.

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>