Amps
[Top] [All Lists]

[AMPS] TL922

To: <amps@contesting.com>
Subject: [AMPS] TL922
From: amps@txrx.demon.co.uk (Steve Thompson)
Date: Thu, 26 Aug 1999 07:19:00 +0100

-----Original Message-----
From: Court <ve3az@passport.ca>
To: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
Date: 25 August 1999 21:18
Subject: [AMPS] TL922


>
> I recently bought a used TL922 amplifier. It is in
excellent condition
>except for the front panel. The former owner glued 3"
graduated dial
>plates to the panel tune and load positions. He either used
Krazy glue
>or some form of clear epoxy. I have managed to remove the
metal dials
>but there is quite a bit of glue residue remaining on the
panel which I
>have found impossible to remove. I have tried WD40,
acetone, varsol,
>laquer thinner, nail polish remover and a heat gun.
> Can anyone offer any suggestions as to how to remove the
glue/epoxy
>without damaging the panel paint or the silk-screened tune
and load
>markings.
>
>--
>Court
>
Some types of glue go very brittle after a spell in the
freezer, and can be chipped off.

Hot water might be worth a shot!

Steve


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>