Amps
[Top] [All Lists]

[AMPS] Re: Filament Xfmr.

To: <amps@contesting.com>
Subject: [AMPS] Re: Filament Xfmr.
From: measures@vcnet.com (measures)
Date: Sun, 3 Oct 1999 22:16:33 -0700
>
>About:
>
>"I am building an amp with four 3-500Z using low bands only (160 and
>80m).
>I do have two filament transformers, 5V/80A w/o a center tap on the
>secondary coil. The other one contains four coils with 5V/25A ea. coil
>also
>w/o any center taps on the secondary side."  (Etc.)
>
>How about connecting a small "audio" or "power supply" choke from each
>side of the secondary to "eventual" ground? 

If you nean to HV negative, ok.  You can also construct a 5v/60Hz 
center-tap choke/auto-trans on a high-mu ferrite core.  It does double 
duty by carrying the cathode current to HV neg.  
-  later, Roy.  

-  Rich..., 805.386.3734, www.vcnet.com/measures.  


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>