>
>I think Vic is asking about the resistor that goes from the bottom
>of a diode bridge in the P.S. to chassis ground.
Agreed
>This raises B-
>a few volts above ground so you can measure Ig and Ip in the
>B negitave side.
Ig, yes. However, even if the cathode were grounded, anode-current
would be metered by connecting the anode-current meter shunt between gnd
and hv negative.
>.......
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|