>
>What is the bias voltage ? Have you tuned it up properly and are both meter
>shunts still the correct resistance ?
>
Checking the meter accuracy is a good idea. So is measuring the R of the
dummy load. Wattmeters can not give accurate readings unless the load is
50 ohms, as checked with a DMM. // Heath cantennas are especially
vulnerable to damage because they use a resistor that is rated at 50w
continuous.
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|