>
>I'm in need of the 6 electrolytic, insulated caps used in
>the power supply filtering of this amp. Their values are
>140mf 450v. The factory ones are about 1-3/8" in dia. and 4"
>long.
>
>Anyone have any number of these or know where they can be
>found?
>
140uF is a bit small for this application. Electrolytic design has
advanced. You can now buy more C in the same diameter, in a shorter
length. If you want the caps to last, order the 105 degree-C rated units
instead of the 85 degree-C units. Mouser and Digikey carry such caps.
// It is a good idea to measure fil. V
good luck, Dwight
- Rich..., 805.386.3734, www.vcnet.com/measures.
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|