Amps
[Top] [All Lists]

[AMPS] Tank coils

To: <amps@contesting.com>
Subject: [AMPS] Tank coils
From: kc4slk@csrlink.net (Mike Sawyer)
Date: Tue, 18 Jan 2000 23:03:32 -0500
I would try using a tubing bend and bend it in 90 degree segments. You can
get them at Lowe's or Home Depot.
Mike(y)
W3SLK
----- Original Message -----
From: Fisher <fisher@pldi.net>
To: <amps@contesting.com>
Sent: Tuesday, January 18, 2000 5:49 PM
Subject: [AMPS] Tank coils


>
> By the way, what is the easiest way to neatly wind a coil from 1/4" copper
> tubing to say 1 1/2' dia.  I have heard that to heat it up first, then
> quickly cool it will soften it and make it easier to wind.  What works
good?
>
> Thanks,
>
> Lu K5YP
>
>
> --
> FAQ on WWW:               http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
>


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>