Amps
[Top] [All Lists]

[AMPS] Re: Filament Chokes

To: <amps@contesting.com>
Subject: [AMPS] Re: Filament Chokes
From: ve3ax@cujo2.icom.ca (222WAS7)
Date: Tue, 22 Feb 2000 17:03:55 -0500
OK here's the question......

What about an 8877 with separate cathode/filament on 6 meters?
I have seen with, and without, in published designs.  What do the gurus say?

73

Peter
VE3AX

measures wrote:

> >
> >> I was reading the HF amps section the other day, and was surprised to read
> >> the flat statement that the filament choke is not necessary in
> >> grounded-grid amplifiers at HF.  Or did I misunderstand?
> >>
> >> 73,  Pete N4ZR
> >>
> >That is true if you are talking about indirectly heated tubes with a separate
> >cathode pin(s). The old glass tubes still need one.
> >
> >BTW, I see lots of ridiculously high bids for B&W FC-15's and FC-30's on
> >E-Bay. Bear in mind that these do not cover 160 meters when you are bidding!
> >
> The 9uH fil. choke in the SB-220 works quite nicely on 160m.  To cancel
> the reactance of the choke, add approx 900pF to C2 in the 160m tuned
> input.
>
> cheers
>
> --
> FAQ on WWW:               http://www.contesting.com/ampsfaq.html
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>