Amps
[Top] [All Lists]

[AMPS] 4CX-1600B

To: <amps@contesting.com>
Subject: [AMPS] 4CX-1600B
From: w4th@webtv.net (Tom Hix W4TH)
Date: Mon, 28 Feb 2000 07:06:49 -0600 (CST)
I saw this comment in one of the post about the 4CX-1600B tubes.
==================================
The 4CX-1600B with the exception of the Australian Emtron design has not
seen it's way into commercial designs because Svetlana can not provide a
reliable deliver schedule for the tube. George Daughters has built a
homebrew amp around this tube and his initial reports were good. He
hasn't said anything about how the amp has held up in ongoing service.
==================================
I may be wrong (usually am) but I thought QRO, Ten Tec and Emtron all
built amps using the 4CX-1600B. The QRO folks make two amps that use
this tube, a one tube model (3KDX) for the US market, and for the export
market a two tube model (3KDX Mark ll). I think Ten Tec has only been
making their new Titan II  which uses this tube for the last 6 to 12
months. But like I said, I may be wrong.
73 Tom
W4TH

===================================
Be sure to visit my web sites. 

Amateur radio amp tubes.
http://msnhomepages.talkcity.com/ClassifiedsCt/tomstubes/index.html

Ham Radio Homepage.
http://www.geocities.com/Heartland/Woods/6222/



--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>
  • [AMPS] 4CX-1600B, Tom Hix W4TH <=