Amps
[Top] [All Lists]

[AMPS] AL-80 / SB-1000 circuit improvements

To: <amps@contesting.com>
Subject: [AMPS] AL-80 / SB-1000 circuit improvements
From: measures@vcnet.com (measures)
Date: Mon, 28 Feb 2000 09:22:24 -0700
To owners of SB-1000s and AL-80s:  :

The B+ to gnd bypass cap. (C-23 in SB1000) at the base of the HV RFC 
(RFC-3) is 1000pF.  At  1.8MHz, 1000pF has -j88 ohms of reactance.  It is 
my opinion that 88 ohms is not a sufficient bypass.   My unsolicited 
advise is to:

1.   parallel more C with C23 to keep RF away from PS components during 
160m and 80m operation.  
2.   add a glitch protection resistor in the B+ lead. 
3.  add 200a-pk glitch diodes to protect the meter movements.  
4.  disregard the users' manual's ok of more than 500mA of anode current. 
 No 3-500Z/8008 manufacturer has Ever rated this tube at more than 400mA. 
 
Might not the designer improve his credibility if he corrected his 
misstatement?.  

good luck.  

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>