Amps
[Top] [All Lists]

[AMPS] Dope question

To: <amps@contesting.com>
Subject: [AMPS] Dope question
From: 2@vc.net (measures)
Date: Tue, 25 Apr 2000 10:13:16 -0700
>
>Phil asks;
>
>>But can someone explain to me why you can or can't use a linear on AM?  
>
>You can. As the PEP is 4 times the carrier power for 100% modulation, a
>linear rated at 1600w PEP out should only be driven to 400 watts of carrier.
>You also need to make sure that the rating of the amp is such that it can
>produce continuous carrier at one quarter of the PEP - sweep tube amps, for
>example, tend to over-run the tube on the basis that the peak to average
>ratio is low, and you can get away with it. Carrier is another matter -
>especially as atrue AM op. is supposed to lock the PTT down for a 20 minute
>monologue.....

Life is far too short for typical AM lock-to-talk monologues.  . 
>
>cheers, Peter. 

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>