Amps
[Top] [All Lists]

[AMPS] [Fwd: Inrush Current -:)]

To: <amps@contesting.com>
Subject: [AMPS] [Fwd: Inrush Current -:)]
From: 2@vc.net (measures)
Date: Wed, 26 Apr 2000 20:22:42 -0700
>Message-ID: <3907A9DE.28A0@blomand.net>
To: <amps@contesting.com>
>Date: Wed, 26 Apr 2000 21:45:50 -0500
>From: "Bob & Linda McGraw (K4TAX)" <RMcGraw@blomand.net>
>Reply-To: RMcGraw@blomand.net
>Organization: Ben Lomand Internet
>X-Mailer: Mozilla 3.01C-INFOAVENUE  (Win16; I)
>MIME-Version: 1.0
>To: tentec@contesting.com
>Subject: Inrush Current -:)
>Content-Type: text/plain; charset=us-ascii
>Content-Transfer-Encoding: 7bit
>
>As a matter of practice, in the interest of protecting a very expensive
>tube, in my home brew 2 meter 8877 amp, inrush current limiting is
>provided.  A correctly designed, not over rated, filament transformer
>will do the job nicely.  However, if the current rating of the filament
>transformer is too high, certainlly inrush current limiting is strongly
>advised.  (EIMAC makes a point of this.)
>
Eimac makes no such point in the 8877 specs. 

>.....

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>