Amps
[Top] [All Lists]

[AMPS] Modification for SB-220 for RFC-2

To: <amps@contesting.com>
Subject: [AMPS] Modification for SB-220 for RFC-2
From: 2@vc.net (measures)
Date: Mon, 8 May 2000 22:47:32 -0700
>
>Hi All,
>A while back someone posted a note concerning replacing the 8.5 uH choke
>(RFC-2) in the B+ supply line in the SB-220 amp.  I can't remember the rest
>of it thought.  I think it may have been to replace it with a 1 ohm
>wire-wound resistor, but I am not sure.

The usual thing is to replace the choke with a 10-ohm to 15-ohm, 10w, 
vitreous-enamel wire wound resistor.  
>
later, Jeff

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>