-----Original Message-----
From: Conrad Farlow <conrad.farlow@virgin.net>
To: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
Date: 10 May 2000 01:30
Subject: Re: [AMPS] 50MHz 8877 amp. plate circuit
>
>
>----- Original Message -----
>From: Phil Clements <philk5pc@tyler.net>
>To: Chris Tran GM3WOJ <gm3woj@talk21.com>; <amps@contesting.com>
>Sent: Monday, May 08, 2000 6:55 PM
>Subject: Re: [AMPS] 50MHz 8877 amp. plate circuit
>
>
>>
>> Hi Chris,
>> Duplicate the design at http://user.super.net.uk/~equinox/8877.html
>> I have used this design several times, and it worked every time.
>> The plate choke is very critical here...that may be messing up your
>> anode circuit.
>> Good luck!
>> (((73)))
>> Phil, K5PC
>
>I've copied this twice and its worked perfectly and the best input match
>I've ever seen.I used jennings Vac variables on tune and load and
everything
>worked perfectly.
>
>73 de Conrad G0RUZ
I couldn't access the original today - did it use a vacuum loading cap? I
fthat's the case, the one I'm trying to fix isn't a real copy and the
inductance in the loading cap might be the problem.
Thanks,
Steve
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|