Amps
[Top] [All Lists]

[AMPS] Standardised connector?

To: <amps@contesting.com>
Subject: [AMPS] Standardised connector?
From: fredffff@hotmail.com (Fred Fliss)
Date: Thu, 18 May 2000 00:20:18 EDT
Hello, esteemed gentlemen of the reflector,

I am assisting a chap who is building a multi-multi station and the issue 
arises of the 220 volt mains for the amplifiers.  Is there a 'standard' 
connector that amplifier owners and users prefer to use?  Most likely the 
station will be built with a number of custom-built amplifiers along with a 
few 87As and Acoms as quick swap-in spares.  The concept of allowing a guest 
operator to show up with his/her favorite amplifier is one factor leading to 
the inquiry of preferred connector.  Gazing at electrical supply houses 
suggests that there's more than one possible connector, at least in the US.  
I know what I have used, but that may not be what is preferred.

Kind regards to the always benevolent and mostly docile reflectees,

Fred
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>