Amps
[Top] [All Lists]

SV: [AMPS] SB1000 parasite question for Tom and Rich+

To: <amps@contesting.com>
Subject: SV: [AMPS] SB1000 parasite question for Tom and Rich+
From: N4NT@chartertn.net (Michael O. Hyder)
Date: Thu, 10 Aug 2000 09:48:50 -0400
I had a similar problem with a Heath SB-220 on 10 meters.  Turned out I did
not have the loading control advanced enough by far.

Regards, Mike N4NT@chartertn.net

----- Original Message -----
From: "Ian Roberts" <ITR@Nanoteq.co.za>
Cc: <amps@contesting.com>
Sent: Thursday, August 10, 2000 4:46 AM
Subject: Re: SV: [AMPS] SB1000 parasite question for Tom and Rich+


|
|
|
| Gentleman, could Han's problem not be a huge SWR on the output of the
| tube, unrelated to anything more exotic?
|
| Ian ZS6BTE
|
| sm5ki wrote:
| >
| > How can a new 3-500Z tube, pushed to around 250 watts output, power
glow?
| >
| > How can two different new tubes behave in exactly the same way?
| >
| > And if the tubes are weak as the owner says, they should draw low
current
| > and not glowing at all?
| >
| > Is this not an indication the problem is in the amp not the tubes? My
| > swedish made copy of the COLLINS 30L-1 had glowing 811s  on 80 when the
| > tubes were at the same time selfoscillating on around 50 MHz. Could this
SB
| > 1000, if it has  parasitics,  behave in the same way?
| >
| > The reason could be the parasitic choke changed value due the
temperature
| > effects or capacitive coupling beetween the filament bifilar choke and
anode
| > on the higher bands?
| >
| > If the zener is shorted, the tube draws more zero signal current and has
| > higher small signal gain. The chances for a parasitics to start is thus
| > higher especially when the new tubes have higher gain at the parasitic
| > frequency.
| >
| > That his SB 1000 has a broken ceramic switch may, of course, be an
| > indication that something is wrong causing the problem?
| >
| > Maybe he did not burn-in the tubes long enough?
| >
| > How are the chances the parasitic has now ruined the new tubes cathodes?
| >
| > This amp is in another city some 500 kilometers from the home QTH and I
had
| > no chance to see the amp and help my friend with the problem.
| >
| > These two EIMAC tubes were taken out of sealed cartoons and they were
thus
| > new and looked very much unused.
| >
| > Tnx in advance fellows and 73s de Hans SM5KI
| >
|
| --
| FAQ on WWW:               http://www.contesting.com/FAQ/amps
| Submissions:              amps@contesting.com
| Administrative requests:  amps-REQUEST@contesting.com
| Problems:                 owner-amps@contesting.com
|


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>