Amps
[Top] [All Lists]

[AMPS] RF high power tube

To: <amps@contesting.com>
Subject: [AMPS] RF high power tube
From: ITR@Nanoteq.co.za (Ian Roberts)
Date: Mon, 23 Oct 2000 09:40:17 +0200
"John T. M. Lyles" wrote:

> The X2159/8974 tetrode is certainly
> a higher output power device, but is best for VLF and MW
> transmitters. The Saudi's used them for a megawatt or two at one
> time, I was told. But then they got the Harris solid state megawatt
> rigs, with many transistors.
> 
> A year or so back, the VOA reduced the usage of 4CM300,000G or GA so
> a lot of these tubes might be on the surplus market. These are
> similar to the Thomson TH537. They were PDM modulators, now replaced
> by solid state devices, in a massive retrofit by the manufacturer.

For those mining coal and pumping steam, these references to solid state
megawatt devices are best ignored....

Ian ZS6BTE

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>