On Mon, 23 Oct 2000 11:40:43 JAVT "Firson Maryutenli"
<firson@hotmail.com> writes:
>
>I was interested for G2DAF Amps Circuit, so what kind of Diode should be
>used to replace that vacum tube diode.
>
>Thanks in advance
>Firson - YD1BIH
Hi Firson,
I don't believe that any suitable semiconductor diodes are made for
that application.
The part would need to be rated at a couple hundred volts PIV with a
reverse recovery time in the vicinity of a few nanoseconds, and rated at
a hundred milliamps or so for the original DAF.
The only part I am aware of that would even be close would be a series
string of MBD701's (70V PIV, sub nanosecond recovery)... and I'm not sure
how happy they would be in series!
There are some applications for which tubes yet remain the best
choice! :-)
73,
Marv WC6W
*
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|