>
>Hi All,
>I have a large dry dummy load and need to add some circuit to measure DC
>voltage for radio work.
>
>My question, does anyone have a simple circuit to add to the dummy load to
>produce a measurable voltage? Can I use the simple circuit that is in the
>old Heath kit dummy loads? It is just a capacitor, diode, resistor, and
>capacitors.
>
>Any advice?
I use a BNC "T" with stiff wires soldered to the pins on one side. This
allows me to clip on a 100 to one oscilloscope probe, allowing me to
measure V across 50-ohms.
cheers, Jeff
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|