>
>
>> There must be 100's of Henry 2000D's and 5000D's running 8 hours per day
>> at 2-5 kw on 13.560 mhz. They have type N's at the output of the amp, the
>> Bird line section, the tuner, and the load. As someone very wisely stated,
>> the interconnecting cables all have properly installed connectors. All
>> bets are off, otherwise.
>
>All bets are off if the load SWR is high also. If I wouldn't trust a
>BNC in the application, I wouldn't trust an N connector.
>
>Anyway, the question was about high power.
A person who is not familiar with the correct installation procedure for
N fittings is not likely to produce trustworthy results.
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|