Amps
[Top] [All Lists]

[AMPS] SWR Protection

To: <amps@contesting.com>
Subject: [AMPS] SWR Protection
From: w7ti@jps.net (Bill Turner)
Date: Sun, 03 Dec 2000 16:26:36 -0800
On Sun, 3 Dec 2000 20:34:07 -0500, Tom Rauch wrote:

>The current is read via transformer coupling to the line which 
>converts line current to voltage. Voltage is read by a voltage divider 
>either with capacitors or a transformer.
>
>These voltages are summed at radio frequencies and the sum fed 
>to a voltmeter system.
______________________________________________________

This is why I suggested the gentleman use a fault detector which
monitors both RF voltage and current separately and trips when either
one exceeds a limit.  Summing them together and monitoring only the
sum may not cause a trip under certain fault conditions.

73, Bill W7TI

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>