Amps
[Top] [All Lists]

[AMPS] AL-1500, AL-82, AL-1200, QRO???

To: <amps@contesting.com>
Subject: [AMPS] AL-1500, AL-82, AL-1200, QRO???
From: g4piq@btinternet.com" <g4piq@btinternet.com (Andy Cook, G4PIQ)
Date: Tue, 16 Jan 2001 22:52:10 -0000
Rich wrote :

>Did the amplifier that shorted the 3cx1200A7s have a glitch resistor. ?
>Who made the amplifier?

Yes. The amplifier is a Henry and has a 25 ohm resistor (+ diode) in the 
path between the -ve side of the filter capacitor and ground.


Tom wrote :

>The 3CX1200A7 is probably the most reliable tube out there.
>Failures are very low. It is also one of the least stable, has high
>internal capacitance, and is moderately hard to drive. That's the
>tradeoff.

This may well be true - it seems a solid tube with high grid dissipation 
capabilities and no issues with a big glass vacuum, but I'm just speaking 
as I've found. I can't say why the first tube failed - the PA was like that 
when bought used. The second one failed around 5 years later following a 
contest where we had a power outage which . At first you'd just see a 1 
second kick on the grid and anode current meters at turn on, and then 
eventually (4 contests or so later) it just went ping.

Andy




--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>